Welcome to our Knowledge Base
Category
< All Theme
Print

Toolpath Walk Simulation

       Machining path can be previewed though Toolpath walk simulation, thus avoiding trial cutting and reducing cost.

        



      Command:

      MenuToolpath > Toolpath walk simulation】                        Toolpath  Bar 


      Steps

     1. Select the Toolpath.

     2. Click Menu【Toolpath > Toolpath walk simulation】.

     3. Adjust simulation speed and click on start to see the machining process and feedrate.

      Notes:

     The red frame: the toolpath of cutting or other engraving.

     The gray frame: the toolpath of tool lifting.