Welcome to our Knowledge Base
Category
< All Theme
Print

Toolpath Panel

         Separate a Toolpath into several smaller portions, after machining, you can combine the portions together to form a complete one. Resolved the work area of your machine is not big enough.

          


         Command:

MenuToolpath > Toolpath Panel


       

        Steps

        1. Select  the Toolpath.

        2. ClickMenu【Toolpath > Toolpath Panel】.

        3. Set the parameters, click OK button.

Parameters:

Width: the width of each independent Toolpath after applying Toolpath panel.

Height: the height of each independent Toolpath after applying Toolpath panel.

Use Guidline: use the guideline to separate a Toolpath.

Refresh: to reset the above parameters.


Notes: you should put the object in the drawing window (the grey rectangular box); otherwise, the function is invalid.