Welcome to our Knowledge Base
Category
< All Theme
Print

Image Relief Machining

      Image relief machining is to engrave the object after the image is converted into grayscale image. The machining is based on brightness level.

      


       Command:

        MenuToolpath > Image  Machining >  Image Relief Machining】                          Toolpath  Bar


   

      Steps

      1. Select the objects .

      2. Click Menu【Toolpath > Image  Machining >  Image Relief Machining】.

      3 Set the parameters, Click OK button.

Parameters:

1)Min brightness depth: the depth in max grayscale.

2)Max brightness depth: the depth in min grayscale.

3)Overlap ratio: the ratio of the width of the tool bottom blade to the width of the last Toolpath.

4)Horizontal and vertical : the direction of the toolpath.