Welcome to our Knowledge Base
Category
< All Theme
Print

Project Toolpath

       Project the toolpath on the surface.

     


      Command:

MenuToolpath > Surface Finish >  Project


Steps:

1. Finish mill the ellipsoid.

2. Make Area clearance for the sign to generate a toolpath.

3. Select the toolpath generated and the ellipsoid, then for align on center.

4. ClickMenuToolpath > Surface Finish > Project.

      5. Set the parameters, click OK button.

Parameters:

Total depth: Depth of projected toolpath into the surface.

Layer count: the number of layer, the machining is done layer by layer on the material.

Layer depth: the depth pre layer.

Keep original depth: keep original depth, the depth generated by area clearance(or other machining) will be kept, thus Total depth will deepen the toolpath’s depth .