Message

Message： Hello! I have a wave which is saved in uсс (file extension). Unfortunately i didn’t remember it’s parametres by which I did it. How can I create the wave in ucancam waveboard with the same parametres but another size? Thanks Ekaterina 2017/04/12

Reply： till now it is difficult. but in V11 ucancam will release a new function : create toolpath template from toolpath. ( 2017/04/12 )

Message： I have ucancam 10.4 stan can I upgrade to 10.6 pro ? wath the price? shukie 2017/04/12

Reply： you can upgrade to 10.6 pro, but you need send back the old dongle. ( 2017/04/12 )

Message： Hi, what is the difference between Ucancam Standard, Pro and Pro + Rotary Axis for CNC engraving/3d machining? Thanks Stefan 2017/04/10

Reply： pls check http://www.ucancam.com/purchasing.asp ( 2017/04/10 )

Message： Hi there, I just got your Ucancam + rotary, when I import a STL. file and do my tool part and I go to NC. studio or do the work, It always comes out half of my sculpture. The length of my STL image is 700mm but it comes out has 345mm, can you tell me why this is happening? Thomas 2017/04/10

Reply： pls send your ucc file(include model and toolpath) to tech@ucancam.com ( 2017/04/10 )

Message： after i got image from Ucancam to pendants shows on pendant 83 mm and cuts 2.5 times larger object with woodman , why and how i can fix it Viktor 2017/04/01

Reply： i am not clear what you mean, you can send your detail question and ucc file to me ( 2017/04/01 )

Message： I have a problem with my dongle – the light comes on, however the programme says that dongle cant be seen please advise Lara 2017/04/01

Reply： pls check wether you have installed the driver of dongle. ( 2017/04/01 )

Message： Where can I get a v10 manual? Why doesn’t one come with the software? Thanks. L 2017/03/27

Reply： it is in help, pls press “F1″key when run ucancam. ( 2017/03/27 )

Message： if i import dxf but its have many shapes that i need fix 1.the shape not close well 2.the direction is not only one ,but can be 2 in oposite how can i fix this? thank yaakov 2017/03/24

Reply： ucancam has functuin named “Link”, which can connect the open curves. ( 2017/03/24 )

Message： Hello, i need to mill a shower with drain in one corner. How can i do? Andrea 2017/03/24

Reply： pls send me the image . ( 2017/03/24 )

Message： I installed ucannest new version. But it’s giving error unable to create new or empty document. Please help. Anoorang 2017/03/22

Reply： your dongle is not for ucannest. ( 2017/03/22 )

GuestBook

Cancel reply