Message

Message： I am totally new on CNC designs. I would like to purchase a CNC router that is distributed in South Africa and is running on Ucancam. I would like to find out if you have a program available to cut a long case clock (grandfather). All the wooden components for the case. Herman Lamprecht 2018/04/16

Reply： ucancam standard version is OK ( 2018/04/16 )

Message： How to use variable TOOLPATHNAME, when I use that in sentence: TOOLCHANGE <[TOOLPATHNAME]> it works but only when I try export only one path, when I try export more paths in one file the UCC hang on. Thank You Artur Artur 2018/04/11

Reply： Thanks for your bug report. we will fixed it in next sub version ( 2018/04/11 )

Message： Hello, In the version 11, i can not find the way to trim 3D panel with object? pls let me know how? Mo 2018/04/11

Reply： it is replaced by “boundray trim” ( 2018/04/11 )

Message： Hello, I have to use multiple bits for my design, but when i change the bit number and add in the file to stop so i can change the bit, its never stop, can you please let me know what to do to stop the spindle to change the bit? Thanks, Mo Mo 2018/04/11

Reply： you can add “stop” cmd in CHANGETOOL in post processor ( 2018/04/11 )

Message： I have 3 separate tool path blue lines on my design, how do I tell the program which 1 to cut first? Thank you, Garth Garth Custers 2018/04/10

Reply： when output the toolpath, adjust the order. ( 2018/04/10 )

Message： I’ve just updated to ucannest V11 and it won’t load it says ” failed to create empty document”? please can you help justin knapman 2018/04/10

Reply： V9 dongle can notrun V11 ( 2018/04/10 )

Message： When will Ucancam Wave Version V11.0 appear? Ekaterina 2018/04/09

Reply： we have released V11. you can download it ( 2018/04/09 )

Message： I have a 5mm by 50 mm long aluminum strip 10 mm thick. Now i want to reduce its thickness to 8mm from 10 mm. Now which options i should choose in ucancam to achieve desire results. Thanks Haroon 2018/04/08

Reply： area machining ( 2018/04/08 )

Message： Hello , have you please : ProductName=UCanNest V9.8 ProductDescription=for Plasama, Laser, Water Jet Cutting can you send me price thank you Wassim 2018/04/04

Reply： check http://www.ucancam.com/purchasing.asp ( 2018/04/04 )

Message： Hello, When I do wood cutting, some parts get broken because these parts are moving when the bit get to the end of the path. Some peoples suggested to use double side tape, but i dont like it. What do you suggest to solve this problem? Thanks ! Mo Mo 2018/03/29

Reply： you can try to set plung as ramp. or add the bridge. ( 2018/03/29 )

GuestBook

Cancel reply