Message

Message： Hello. To work on a CNC machine, I need the program Ucancam Pro version 11.5. I can download this program from your website, and where can I buy a key for this program? Dmitriy 2021/02/25

Reply： you can buy from http://www.ucancam.com/purchasing.asp ( 2021/02/25 )

Message： Hello, I need Ucancam V10.7 software installatioon file. I have dongle but not have setup file. Please help. Thanks. Tanzer 2021/02/19

Reply： you can download http://www.ucancam.com/V11.4-Ucancam-Eng.rar to try ( 2021/02/19 )

Message： Hi I am strugling to cut my files , the size is way below maximum table size but it still errors on y+ over soft limit. checked work bound and this size is about 2 x drawing size. please help Remondo 2021/02/19

Reply： pls check the origin point when you export nc code.make sure it is not far away the part. ( 2021/02/19 )

Message： Getting a message “failed to create empty document” on start up Verdun 2021/02/19

Reply： your dongle is not matched with ucancam version. ( 2021/02/19 )

Message： How i can modify “tool change” command in post processor file so that the spindle turns ? the programme running but the spindle is power OFF . i try all processor file and i modify but not turn the spindle. and i can install UcanCam V9 waves in Win 10 ? you have update driver of dongle ? helaoui 2021/02/19

Reply： pls check if you add “M03 ” in “tool change” command. ( 2021/02/19 )

Message： hi..im having a problem…when saving the file it is showing different value eg im using a bit which i assign to cut a depth of -4mm when i save the file the depth would have changed to -8mm.please help musa 2021/02/19

Reply： pls check the z of origin point when you export nc code. ( 2021/02/19 )

Message： существует версия ucancam v8 на русском языке или только на английском? Илья 2021/02/19

Reply： ucancam V8 is too old. it is out of service now ( 2021/02/19 )

Message： Hello Seems to a problem when i eksoport data to NC studio program. Its out of limit even everything is on 0 all akses. Had this problem before and then i had to instal the program again. is it possible to just run an download from the website instead of delete an new instale? Harald 2021/02/19

Reply： about the limit problem. it is not related with version. you need check the origin point you set in export nc code. ( 2021/02/19 )

Message： Hi i have SN:M13-4-0486 Dongle i think its old version dongle, but we cant use program Ucancam Standard Version V11.5, how can i find old verions programs? Sait 2021/02/19

Reply： the dongle is too old , you can download http://www.ucancam.com/V11.4-Ucancam-Eng.rar to try. ( 2021/02/19 )

Message： hello How I can modify the post processor file to make the spingle rotary. I try all post processor in UCANCAM V9 Waves.but the spindle not rotary.　　　Reply：　　you can modify “tool change” command in post processor file you dont can answer me good answer !!!!!!! i want good explain and good answer. med 2021/02/19

Reply： add： TOOLCHANGE ( 2021/02/19 )

GuestBook

Cancel reply