Message

Message： Hi, I am asking for the 3rd time!! I installed Ucancam V9.3 Wavebaord, working fine. I installed Ucancam V9.8 Standard, This does not work with my dongle. NOW I cannot use anything!!!!!! How can I use Version 9.3 again???? Is there a registry entry stopping me?? Simon 2014/03/03

Reply： pls uninstall ucancam. and reinstall again! ( 2014/03/03 )

Message： I’m have the standard version I still get the error message cannot create an empty document David 2014/02/28

Reply： you have installed the mismatched ucancam software. ( 2014/02/28 )

Message： Hello I recently had a problem and was getting the error message ucancam.exe was not a valid win 32 application The company I purchased the plasma table from sent me a new CD and that fix that problem now I’m getting the error message failed to create a empty document The software version is v9.7 The sn# m13-4-0026 I triad it on a computer with Windows 7 A computer with windows XP and a computer or Windows 8 I get the same message on all of them thank you for a help David 2014/02/25

Reply： your dongle is for ucancam standard version. maybe you have installed ucancam pro version. ( 2014/02/25 )

Message： Using Ucancam with Auto Banner Printer Cutter, when I send to cut it cuts a piece of letter & stops. Replaced eprom chip but still nothing. Do I need to clear cache/buffer. How do I do this? Your help will be much appreciated. Thanks Niki 2014/02/24

Reply： just exit ucancam, then restart it. ( 2014/02/24 )

Message： Hello Recently I bought an engraving machine from Redsail company and model RS3040. The machine is equipped with remote control DSP-0501. I do not have software for remote DSP-0501. I am wondering whether the program fits “CanCam”, to work with remote DSP-0501? Where and how you can purchase this program if it is suitable to the console DSP-0501? Evgeniy 2014/02/24

Reply： please contact with sales@ucancam.com for purchasing ucancam software ( 2014/02/24 )

Message： Hello I recently purchased A new cnc plasma cutter that came with your software Version v9 sn# m13-2-0329 when I install it on my computer installs fine when I open it a message pops up That ucancam.exe is not valid win32 application I try this on a Computer with windows Xp & 7 David 2014/02/21

Reply： pls check your computer for virus！ ( 2014/02/21 )

Message： Hello! I bought an engraving machine from company Liyuan, and model GV 2518e. And I want to ask, does Ucancam 8 or 9 will work with it? Arne 2014/02/13

Reply： Ucancam has a powerful post processor which can export the code for your machine. ( 2014/02/13 )

Message： We have purchased one CNC router with UCANCAM-9 Please tell me how to save my design in G code amit 2014/02/13

Reply： pls visit http://www.ucancam.com/training2.asp ( 2014/02/13 )

Message： Hello! Does Ucancan9 software work with any CNC engraving/router machine? Arne 2014/01/24

Reply： there is a powerful postprocessor in ucancam so ucancam can work on any router machine. ( 2014/01/24 )

Message： Hi, I faced with trouble with ucancam v8. It not open most of UCC files, bigger than 300kb, and some smaller files. It also shutting down than I trying to draw waves ant than i trying to cut ellipses. And also program terminates then i starting import of any dxf files. I already tried to install ucancan on another PC and faced with same troubles. That’s why I think that trouble is in USB dongle – I think it’s cache is owerloaded. But I don’t know how to erace dongle’s cache, if it possible. Hope on your help, best ragards. Artyom 2014/01/24

Reply： in system setting, pls reset to default. ( 2014/01/24 )

GuestBook

Cancel reply