Message： have problem with g code transfer in ucancam v8. 1. if i use cut position inside or outside —> G code there is only command G01. But if cut position on —-> G code there is command G01 and G02 / G03. 2. spindle can not rotate automatically even though there is already command M03 and does not stop even though there is already command M05. What should I do to solve the problem. thank you Rochan 　rochanIndonesia2017/5/1 6:05:41 　　Reply： 　　you can config the post processor in Ucancam, and ucancam V8 is out of service. pls upgrade to V10.(2017/5/2) hello How to upgarde it. Can be via internet? rochan 2017/05/08

Message： 　Reply： 　　pls check the item “Layer”,and set the count of layer. it is rough mill. if you want the another finish mill, pls select the smaller tool , and uncheck item “Layer” to creat the finish toolpath for rotary axis mill. (2017/4/28) To your reply, Please when do I do the uncheck tool path, is it after I save the rough tool path and reload the image and pick a smaller tool I unchecked do another toolpath and will the software know I have pick a rough tool path before? Because I don’t really understand this path? Thomas 2017/05/03

Message： My computer updated its drivers, and now the dongle doesn’t work, how can I fix this? As this is an important workplace machine. Regards, Anthony Anthony 2017/05/02

Message： Hello, I have problems ucancam v8. 1. Toolpath: border remain 0.00 so Z didn’t go down. 2. Spindle cannot automatic on, I must turn on manual. Thank Rochan 2017/05/02

Message： Hello, Am trying to use surface rough and then surface finish at the same time, but its not allowing me, to select surface finish after surface rough, unless I reload the STL file and do it separately, is this the way it works? Version 10.6 ucancam + rotary Thomas 2017/04/28