Message

Message： hi, what is the diffrence between: 1- V10.6 and V10.7 ucancam. 2- the Pro version and the standard one. 3- i have V10.6 with dongle, so can i use the V10.7 with the same dongle. best regards amine from algeria Nedjma Display 2018/01/12

Reply： 1.about v10.7, pls check the news on web. 2.Ucancam Pro = Ucancam Standard Version + Waveboard + Surface( CAD & CAM ) + Interactive Nesting. 3.the dongle of V10.6 can run v10.7 ( 2018/01/12 )

Message： Using V10.5, I am often crashing during the a session without an option to save any work. I am using a Surface Pro 3 with Windows 10. Very Frustrating Bruce Bruce B 2018/01/12

Reply： pls uninstall all version of ucancam. and reinstall again. ( 2018/01/12 )

Message： Hi all We have the ucancam v10 pro and I have a project for using the waveband function which works fine but I haven’t the option in the drop down menu for the texture trimming which I need to use. I have been looking at the demo disc and it clearly shows the command in the drop down menu is present so my question is WHERE is mine, any help on this much appreciated.. Thanks in advance Bob Bob 2018/01/12

Reply： it is named as “boundary trim” under menu “modify” ( 2018/01/12 )

Message： hi, can i upgrade my V10.6 ucancam to v10.7 best regards amine 2018/01/12

Reply： yes, the dongle of v10.6 can run v10.7. ( 2018/01/12 )

Message： Hi where i can found wave board in ucancam v10? On page is instruction to v9. but in v10 menu is different and i cant find wave board. Julia 2018/01/12

Reply： waveboard function is not included in the standard version. ( 2018/01/12 )

Message： hi, i have v10.6 ucancam, and a 3.6kw air cooling spindle cnc router, my question is: how can i use tow diffrent tools in one cutting. or how can exchange the tool in the middle of the cutting thanks amine 2018/01/05

Reply： you can create the muptiple toolpath with the different tool., and output all the toolpath at the same time. ( 2018/01/05 )

Message： hi, i have v10.6 ucancam, and a 3.6kw air cooling spindle cnc router, my question is: how can i use tow diffrent tools in one cutting. or how can exchange the tool in the middle of the cutting thanks amine 2018/01/05

Reply： you can create the muptiple toolpath with the different tool., and output all the toolpath at the same time. ( 2018/01/05 )

Message： Hi. I Have V9 in WinXp. Standard Version V10 works with my Dongle of the V9????. Because I try to run clear install V10 in Win7 Pro_ and send ” unable to create empty file”. Luis 2018/01/03

Reply： V9 dongle can run V10.6, but can no run v10.7 ( 2018/01/03 )

Message： hi there, how can i use the auto nest of the V10 plz ?? thanks, fouina fouina 2017/12/19

Reply： pls check “help” ( 2017/12/19 )

Message： I just buy ucancam v10 do you have a tutorial for this version because I dont have the nesting tool in the version 10 patric 2017/12/18

Reply： pls check the menu”Transform”–>”Aoti nesting” ( 2017/12/18 )

GuestBook

Cancel reply