Message

Message： If I get dxf files from friends and download into my computer, how do I get them to work with UCANNEST VV10. And when I create a drawing, is the only option to save with UCC, and will the UCC file on the USB run the program on my CNC plasma machine (baleigh PT22). You have a lot of tutorial videos on your site, but not any covering drawing saving, importing, exporting, etc. Could you make some to help dummies like me….Thanks a lot…bill bill 2019/01/24

Reply： you can import dxf file into ucancam. after create the drawing, you need create the toolpath from drawing. and output the toolpath as nc file for your machine. ( 2019/01/24 )

Message： Please help, no matter what file I load or what objects I draw my “align to TOP” tool is greyed out in the menu. How do I fix this or what am I doing wrong? This is not file specific as I am getting this with every single file I use. Jake Oliver 2019/01/18

Reply： thanks for your bug report. we have fixed it and release new version. ( 2019/01/18 )

Message： how to import Autocad to ucancam CNC Software. Thanks I hope your reply. ayechanswe 2019/01/18

Reply： use dxf file. ( 2019/01/18 )

Message： Hi, can I find the post processor for AXYZ_A2MC_ARC_ATC_MM. thanks mihai 2019/01/15

Reply： what is the “AXYZ_A2MC_ARC_ATC_MM”? ( 2019/01/15 )

Message： Good morning, I have a quetion: – I need to install my Ucancam V8.18-070702 with original dongle, in a new PC with win10pro. It’s possible? Run fine? Thank you Angelo 2019/01/14

Reply： Hi Ucancam V8 is too old, it can not run on Win 10. ( 2019/01/14 )

Message： is there a way to set toolpath output set to custom every time rather than point a ? ryan 2019/01/09

Reply： the origin point of toolpath is a important parameter. you need select or set. ( 2019/01/09 )

Message： Hi, How can I find waveboard on Ucancam v10. Please advise. Many thanks. Regards, Aswat MOHAMAD ASWAT 2019/01/09

Reply： ucancam Pro include waveboard . ( 2019/01/09 )

Message： I can’t see to output toolpath to use single zero point on a cut of different pocket holes using different size bits and using profile zero point setting. Every time I output toolpath is always zero on the object toolpath. Is there a way to output all toolpath using one single zero point so all cut objects would be based on design. Thanks. Metrick 2019/01/02

Reply： yes, you can set the same point value when ouput the different toolpath. ( 2019/01/02 )

Message： I downloaded the 11 pro but when I open the program it gives the message failed to crate new page. Please advise. Pierre 2019/01/02

Reply： your dongle is not for ucancam Pro. ( 2019/01/02 )

Message： Would like to know how to cut material that’s longer that CNC cut area. Is there any tools in Ucancam to split the output file and perfectly aligned for the second cut to complete and finish the cut. Metrick 2018/12/24

Reply： “toolpath panel” can split the toolpath to your size. ( 2018/12/24 )

GuestBook

Cancel reply