Message： I draw my objects for cnc plasma, and auto path them, look to make sure the cutting sequence is right and the last cut is on the outside, so my inside holes, etc,get cut before the outside gets cut. I take the thumb drive to the baleigh pt22 and the damn thing cuts the outside of the object, every time. The piece falls into the table before the inside holes get cut??? I had deleted cut paths and re done cut paths and rechecked cutting sequence that is correct. But still outside gets cut first. Please help….. bill 2019/04/12

Message： hello ucancam v8 windows xp was working but now I installed windows 7 does not work from the site I downloaded ucancam v10 program again, could you please help me? murat 2019/04/03

Message： Hello,when I open Ucancam the screen is black and says I should reset please assist Itumeleng Mosing 2019/03/27

Message： I used a depth of 5mm and total cut depth is 16.5mm, Ucancam only drops the multi layer if I change the Plunge position. Johan 2019/03/18

Message： Installed new version but got a problem when using profile machining cutting on outside and selecting multilayer cutting anticlockwise program output ignore multilayer and cut at full depth. Johan 2019/03/11