Message： I have installed uncancam pro on a new laptop running windows 10. On opening i get the message ‘specified module not found’ Also, all my tool paths are 2 mm lower on the Z axis when they are output to an NC file. Example: I want to engrave a line 1mm deep, the toolpath is output as Z-3.000 where it should be Z-1.000 Nathan Moore 2019/05/20

Message： We are upgrading from windows 7 to windows 10. will UcannestV10 work with Windows 10? Joseph L 2019/05/07

Message： hi, Iam using U cancam V9.7 vesrion. There is small problem iam facing. when i would like to draw a line from end point, mid point it is not selecting on exact point from where i would like to draw a line. Even though i take my mouse curser to exact location where i need to select it is starting slightly nearer but not exactly. can u solve this issue please. murali 2019/04/29

Message： In version Ucancam Pro 10.6 is it possible to move 1 of many Bridges? MaxPerf CNC 2019/04/17

Message： I draw my objects for cnc plasma, and auto path them, look to make sure the cutting sequence is right and the last cut is on the outside, so my inside holes, etc,get cut before the outside gets cut. I take the thumb drive to the baleigh pt22 and the damn thing cuts the outside of the object, every time. The piece falls into the table before the inside holes get cut??? I had deleted cut paths and re done cut paths and rechecked cutting sequence that is correct. But still outside gets cut first. Please help….. bill 2019/04/12