---

Rotary Axis

Command:

Menu【Toolpath > Rotary Axis…】

---

1. select model，align the rotary axis of model with X axis,
and align the left side center of mode with origin point(0,0,0)。

2.select the menu 【Toolpath > Rotary Axis…】

3.Set the parameters, click OK button.

Parameter：

Stock：it is a gray cylinder，modify the follow data, change
the size of stock.

1.X range:

X Start: default  is minimum x of model.

X End:default  is maximum x of model.

2.Angle range：

the angle around x axis. Z axis direction is 0 degree , -Y axis direction is 90 degree，-Z axis direction is 180 degree，Y axis is 270 degree。

Start angle：-360—360。

      Angle Range：-360—360。

3.Radisu，the cylinder radius，it is applied in rough mill (Layer mill)。default is maximum radius of model.

Mill Parameter ：

1.Mill depth：from the top suface to x axis。

2.Rate(%)：Tool overlap Rate.

3.Clearance：you can set surface remain which is the
shortest distance between the original surface and surface after
carving.

4.Method：Rotary Along Line And Rotary around X axis。

     Rotary Along Line:

 Rotary around X axis

5.Layer（Layer depth）：Layer mill,it is rough mill for model.