Insert And Inlay

  Inserted and inlayed moulds are made by profile machining and area clearance.

Command:

 Menu【Toolpath > Insert and Inlay >Insert Machining】                     Toolpath  Bar 

MenuToolpath > Insert and Inlay > Inlay Machining                         Toolpath  Bar

Steps:

1 Select the objects.

2 Click Menu【Toolpath > Insert and Inlay >Insert Machining】.

       3 Set the parameters, Click OK button.

       4 Click Menu【Toolpath > Insert and Inlay > Inlay Machining】.

       5 Set the parameters, Click OK button.

Parameters: please refer to the Profile Machining and Area Clearance.

Unilateral clearance: the distance between the inlayed mould and the inserted mould, This parameter is given in both Inlay and Insert, and you need only input one value.