Image Relief Machining

Image relief machining is to engrave the object after the image is converted into grayscale image. The machining is based on brightness level.

Command:

    Menu【Toolpath > Image  Machining >  Image Relief Machining】                    Toolpath  Bar          

          Steps：

     1. Select the objects .

2. Click Menu【Toolpath > Image  Machining >  Image Relief Machining】.

      3 Set the parameters, Click OK button.

Parameters：

1)Min brightness depth: the depth in max grayscale.

2)Max brightness depth: the depth in min grayscale.

3)Overlap ratio: the ratio of the width of the tool bottom blade to the width of the last Toolpath.

4)Horizontal and vertical : the direction of the toolpath.