Finish Emit

Finish emit is used for machinning circularly symmetric shape of the object,.

---

Command:

Menu【Toolpath > Surface Finish > Finish Emit】

---

Steps:

1 Select  surface.

2 ClickMenu【Toolpath > Surface Finish > Finish Emit】.

     3 Set the parameters, click OK button.

     4 Pick the center of emit,generatethe toolpath.

Parameters:

Total depth of Machining: the actual total depth of machining required.

Max depth of Surface: the max depth generated automatically

Start Angle: set the position of start angle.

Sweep Angle: set the value of sweep angle area.

start angle is 0, sweep angle is 180       start angle is 90, sweep angle is 180

Step angle: the angle of two neighboring lines(the smaller, the more precise).

Clearance: you can set surface remain which is the shortest distance between the original surface and surface after carving.

Zigzag: the machining direction is from inside->outside->inside.

One Way: the machining direction, you can select “From Inside” or “From Outside”.

         From Inside                                     From Outside